Panasonic Error Codes

Air conditioning system installation by Paragon Air technicians in Sydney

Is your Panasonic air conditioner displaying an error code? This page lists all common Panasonic air conditioner error codes with plain-English explanations and recommended actions. If you’re unsure what to do or the fault persists, Paragon Air’s Sydney technicians are available for same-day diagnosis and repair — call 1300 507 892.

Common Panasonic Air Conditioner Error Codes

Error Code Meaning Recommended Action
H00 Normal operation / no fault No action required
H11 Indoor/outdoor unit communication error Check wiring between indoor and outdoor units. If fault persists, call a technician
H12 Capacity selection error (mismatch between indoor/outdoor) Verify unit compatibility. Requires technician inspection
H14 Indoor inlet thermistor fault Thermistor may need replacement. Call for service
H15 Compressor thermistor fault Outdoor unit fault. Requires technician inspection
H16 Outdoor current transformer fault Electrical fault — do not attempt repair. Call a licensed technician
H19 Indoor fan motor fault Fan motor may be blocked or faulty. Check for obstructions, then call for service
H20 Outdoor fan motor fault Check outdoor unit for debris. If clear, call a technician
H23 Indoor heat exchanger thermistor fault Sensor fault — requires replacement by a technician
H27 Outdoor air thermistor fault Outdoor sensor fault. Requires technician inspection
H28 Outdoor heat exchanger thermistor fault Sensor replacement required
H30 Discharge thermistor fault Requires technician inspection
H32 Outdoor heat exchanger temp abnormality Check airflow around outdoor unit. Clear any blockages
H33 Reverse phase / open phase detected Electrical supply issue — call a licensed electrician
H34 Outdoor heat exchanger temp control fault Call for service
H36 Liquid thermistor fault Sensor fault — technician required
H38 Indoor/outdoor capacity mismatch Requires professional diagnosis
H42 Compressor protection — overheating Check outdoor unit airflow. Allow to cool, then restart. If persists, call for service
H97 Outdoor fan motor protection Check for obstructions around outdoor unit fan
H98 Indoor unit high temp protection Clean filters and check indoor airflow. Call if persists
H99 Refrigerant shortage / pressure protection Likely low refrigerant. Do not operate — call a licensed technician immediately
F11 4-way valve switching fault Requires technician inspection
F90 Power module protection activation Electrical fault — call a licensed technician
F91 Refrigerant circuit fault Possible refrigerant leak. Do not operate — call immediately
F93 Compressor startup fault Compressor issue — requires technician inspection
F95 High-pressure protection activated Check outdoor airflow, clean filters. If persists, call for service
F96 Inverter fin temperature protection Outdoor airflow blockage likely. Clear area around unit
F97 Compressor overheating protection Check outdoor airflow, allow to cool. Call if persists
F98 High current protection Electrical fault — call a licensed technician
F99 Output current protection Electrical fault — call a licensed technician

Panasonic error code not listed? Still not cooling?

Our ARC-certified technicians diagnose and repair all Panasonic air conditioning models across Sydney. Same-day service available.

Book a Repair — Free Quote

How to reset your Panasonic air conditioner

Many error codes will clear automatically once the fault is resolved. For a manual reset: turn the unit off at the remote, switch off the power at the isolator or circuit breaker, wait 5 minutes, then power back on. If the error code returns, the underlying fault is still present and needs professional attention.

When to call a technician

Any error code involving refrigerant (F91, F95, H99), electrical faults (H16, H33, F90, F98), or compressor issues (F93, F97) should be treated as urgent — continuing to run the unit can cause further damage. Paragon Air provides air conditioning repairs across Sydney with same-day availability.

About Panasonic air conditioners

Panasonic is a well-established air conditioning brand in Australia, known for its energy-efficient inverter technology and quiet operation. Common models in Sydney homes include the Panasonic CS series split systems and Panasonic ducted systems. Paragon Air services all Panasonic models — contact our Sydney team for repairs, servicing or installation.

Paragon Air Conditioning offer